| 厂家(产地)：沙伯基础 | 牌号：C1200HF | 类型：标准料 |
| 比重：1.15 g/cm? | 熔流率：19 g/10 min | 收缩率：0.50 到 0.70 % |
沙比特塑料贸易（苏州）有限公司现货供应沙伯基础PC/ABS CYCOLOY C1200HF一级代理原厂原包,假一罚十,诚信经营,欢迎来电咨询订购！电话：15298887527 （刘生）
产品描述CYCOLOY PC/ABS C1200HF物性表适合于汽车、器具和电气元件
产品说明:
PC +的，***的流动/冲击/高耐热性。低温延展性。用于汽车、电器和电气元件。
| YPICAL PROPERTIES (1) | |||
MECHANICAL机械性能 | Value | Unit | Standard |
Tensile Stress, yld, Type I, 50 mm/min / 抗拉强度,屈服,类型I,50 mm/min | 57 | MPa | ASTM D 638 |
Tensile Strain, yld, Type I, 50 mm/min / 拉伸伸长, 屈服, 类型I, 50 mm/min | 5 | % | ASTM D 638 |
Tensile Strain, brk, Type I, 50 mm/min / 拉伸伸长,断裂,类型I, 50 mm/min | 150 | % | ASTM D 638 |
Tensile Modulus, 50 mm/min / 拉伸模量,50 mm/min | 2270 | MPa | ASTM D 638 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span / 挠曲强度, 屈服, 1.3 mm/min, 50 mm 跨距 | 88 | MPa | ASTM D 790 |
Flexural Modulus, 1.3 mm/min, 50 mm span / 挠曲模量, 1.3 mm/min, 50 mm 跨距 | 2340 | MPa | ASTM D 790 |
IMPACT | Value | Unit | Standard |
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C | 587 | J/m | ASTM D 256 |
Izod IMPACT, notched, -30°C / 悬壁梁缺口冲击强度, -30°C | 480 | J/m | ASTM D 256 |
Instrumented Impact Total Energy, 23°C / 仪表控制抗冲击总能量，23°C | 54 | J | ASTM D 3763 |
Instrumented IMPACT Total Energy, -30°C / 装有测量仪表的落镖冲击Total Energy，-30°C | 54 | J | ASTM D 3763 |
THERMAL | Value | Unit | Standard |
HDT, 0.45 MPa, 3.2 mm, unannealed / 热变形温度,0.45 MPa, 3.2 mm,未退火 | 129 | °C | ASTM D 648 |
HDT, 1.82 MPa, 3.2mm, unannealed / 热变形温度,1.82 MPa, 3.2mm,未退火 | 112 | °C | ASTM D 648 |
CTE, -40°C to 40°C, flow / 线形膨胀系数,-40°C 到40°C,流动 | 7.2E-05 | 1/°C | ASTM E 831 |
Vicat Softening Temp, Rate B/50 / 维卡软化温度 B级/50 | 130 | °C | ISO 306 |
Relative Temp Index, Elec / 相对热指数， 电性能 | 105 | °C | UL 746B |
Relative Temp Index, Mech w/impact / 相对热指数，机械冲击性能 | 80 | °C | UL 746B |
Relative Temp Index, Mech w/o impact / 相对热指数，非机械冲击性能 | 105 | °C | UL 746B |
PHYSICAL | Value | Unit | Standard |
Specific Gravity/比重 | 1.15 | – | ASTM D 792 |
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量，流动，3.2 mm | 0.5 – 0.7 | % | SABIC Method |
Melt Flow Rate / 熔流率, 260°C/5.0 kgf | 19 | g/10 min | ASTM D 1238 |
ELECTRICAL | Value | Unit | Standard |
Hot Wire Ignition {PLC) / 热丝引燃 {PLC) | 3 | PLC Code | UL 746A |
High Ampere Arc Ign, surface {PLC} / 高电流电弧引燃，表面{PLC} | 1 | PLC Code | UL 746A |
Comparative Tracking Index (UL) {PLC} / 漏电起痕指数 (UL) {PLC} | 2 | PLC Code | UL 746A |
FLAME CHARACTERISTICS 火焰特性 | Value | Unit | Standard |
UL Recognized, 94HB Flame Class Rating (3) / UL认可，94HB 阻燃等级(3) | 1.19 | mm | UL 94 |
CSA (See File for complete listing) | LS88480 | File No. | CSA LISTED |
Source GMD, last updated:04/11/2001 |
Processing |
| Parameter | ||
Injection Molding | Value | Unit |
Drying Temperature / 干燥温度 | 105 – 110 | °C |
Drying Time / 干燥时间 | 3 – 4 | hrs |
Drying Time (Cumulative) / 干燥时间（累积的） | 8 | hrs |
Maximum Moisture Content / 含湿量 | 0.04 | % |
Melt Temperature / 熔体温度 | 275 – 300 | °C |
Nozzle Temperature / 注嘴温度 | 275 – 300 | °C |
Front – Zone 3 Temperature / 前区3温度 | 260 – 300 | °C |
Middle – Zone 2 Temperature / 中区2温度 | 255 – 295 | °C |
Rear – Zone 1 Temperature / 后区1温度 | 250 – 290 | °C |
Mold Temperature / 模具温度 | 60 – 90 | °C |
Back Pressure / 背压 | 0.3 – 0.7 | MPa |
Screw Speed / 螺杆速度 | 40 – 70 | rpm |
Shot to Cylinder Size / 每次注射量占料筒熔胶总量的***比 | 30 – 80 | % |
Vent Depth / 排气孔深度 | 0.038 – 0.076 | mm |
